Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

DEPS має статус
Офіційний дистриб'ютор
Raisecom
Виробник:
Доставка
Самовивіз
Доставка транспортними компаніями:
  • Нова пошта
  • DELIVERY
Гарантія
12 місяців офіційної гарантії від виробника

Модифікації:

Найменування Код Наявність Од. виміру Ціна дилерська Ціна роздрібна
1 Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1 171436 бух.

RC1201-4FE4E1T1 - шлюз TDMoverIP для корпоративного сектора і мобільних операторів, що забезпечує передачу TDM-трафіка через мережі з пакетною комутацією. Пристрій підтримує передачу потоків E1/T1 через мережі IP/Ethernet.

RC1201-4FE4E1T1 має 4 порти E1/T1, 4 порти Fast Ethernet з користувальницького боку і 1 порт Gigabit Ethernet з боку мережі. Пристрій перетворює дані потоків E1/T1 в пакети для передачі по мережам з пакетною комутацією, такими як MPLS і Ethernet. Пристрої RC1201 працюють в парі.

Схема застосування:

Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

Feature
Ethernet interface
  • 5 Ethernet ports, 4 for user side and one for network side
  • Transparent Ethernet bridging
  • User bandwidth profile by rate-limiting and VLAN filtering
  • VLAN tagging and stacking (Q-in-Q)
TDM interface
  • 4 E1 or T1 ports
  • E1 balanced and unbalanced or T1 options
  • G.703 unframed and G.704 framed modes
  • CAS and CRC generation for E1 circuit
TDM payload type CESoPSN, SAToP, HDLC and AAL1
TDMoverIP for Pseudowire Emulation
  • E1/T1 communication over Packet Switching Network
  • Support both framed and unframed E1/T1
  • Configurable buffer compensation for network packet jitter
  • Dedicated external clock injection port
  • QoS support by ToS and VLAN per 802.1p and 802.1Q
TDMoverIP timing
  • Adaptive: the clock is recovered from the Ethernet network side interface
  • Internal: the master clock source for the TDM circuit is provided by internal
  • crystal oscillator
  • External: an external clock injection is provided for synchronization
  • Loopback: the transmit clock is derived from the E1/T1 receiving clock
Ethernet switching functions
  • VLAN creation, deletion and configuration
  • 3 port modes: access, tunnel and trunk
  • Port isolation configuration
  • Link aggregation configuration
  • Port mirroring configuration
  • Per port bandwidth profile and rate limiting
  • MAC address table management
  • Up to 4 output queues
  • QoS policy based on CoS and DSCP
  • Ethernet port loopback detection
  • ACL configuration based on MAC
SFP module function
  • SFP module basic information (module type, media type, connector,
  • manufacturer information, speed, wavelength, etc)
  • SFP information retrieve (existing, speed, LOS and fault stats)
  • Digital Diagnostic (Tx power, received optical power, temperature, supply
  • voltage, Tx bias current, etc)
  • Alarm indication
Management options
  • Local management through console port
  • Remote management through SNMP and Telnet
Specification
E1 interface
  • 4 ports
  • Date rate: 2.048Mbps
  • Line code: HDB3
  • Framing: unframed or frame
  • with or without CRC-4
  • Signaling: CAS and
  • transparent CCS
  • Line impedance: 120/75 Oh
  • Jitter: per ITU-T G.823
  • Connector: RJ45 balanced
  • and BNC unbalanced
T1 interface
  • 4 ports
  • Bit Rate: 1.544Mbps
  • Line code: B8ZS/AMI
  • Comply with Bellcore GR-499-CORE, ANSI T1.403,
  • Jitter: per ITU-T G.824
  • Connector:
  • 100Ω balanced, RJ-45
Ethernet interface
  • 1 network port & 4 user ports
  • Data rate: 4 × 10/100Mbps
  • 1 × 1000Mbps
Bundles
  • Up to 64 bundles
  • Payload: CESoPSN, SAToP,
  • HDLC and AAL1
  • PSN: UDP/IP, MPLS, MEF
  • TDM Bytes: 1-1500
  • Jitter buffer size: 0-250ms
  • Destination bundle configure
  • Clock recovery: configurable
  • VLAN: untag, tag & double tag
  • Active VLAN: 4K
  • TPID: configurable
  • VLAN priority: 0-7
  • Dest IP address: configurable
Timing
  • Internal, external, loopback
  • and adaptive
Loopback
  • E1/T1 local and remote
  • loopback
Statistics
  • E1/T1 per G.826 & RFC2495
  • Ethernet per RFC2819
  • Receive buffer indication
  • SFP Digital Diagnostic
Dimension 440 (W) * 44 (H) * 210 (D) mm
Weight < 3KG
Power supply
  • AC: 176~264V, 50Hz
  • DC: -36~-72V
Power consumption ≤ 13W (at max load)
Working environment
  • Temp: -5~50 Celsius
  • RH: < 90% non-condensing
Safety compliance CE certification
Compliance
Standards & protocols
  • For TDM interface:
  • ITU-T G.703
  • ITU-T G.704
  • ITU-T G.706
  • ITU-T G.732
  • ITU-T G.823
  • For Ethernet port:
  • IEEE802.3x full duplex on
  • 10BaseT and 100BaseTX
  • IEEE802.3 10BaseT
  • IEEE802.3u 100BaseTX
  • IEEE802.1p
  • IEEE802.1Q
  • SNMPv1/v2c/v3
Ordering Information
RC1201-4FE4E1T1-AC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, AC power supplies
RC1201-4FE4E1T1-DC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, DC power supplies
RC1201-4FE4E1T1-O-AC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, AC power supplies, use the OCXO highly accurate crystal oscillator
RC1201-4FE4E1T1-O-DC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, DC power supplies, use the OCXO highly accurate crystal oscillator

Відгуки про Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

09 січня 2019

--

Для додавання відгуку необхідно авторизуватись

Або Зареєструватися

Рекомендуємо також

Ми приєдналися до бойкоту російської та білоруської продукції. Слава Україні!

We joined the boycott of russian and belarusian products. Glory to Ukraine!!

прапор України