Head-end station equipment

DCH-3000AL is a digital TV redundant switch based on DVB-ASI standard. It has 6-way 1+1 ASI switches in 1RU chassis. the ASI signal will be automatically routed to backup port if technical failure of the primary port happens.

DCH-2000AD is a high-density active DVB-ASI/SD-SDI signal splitter, which can duplicate one SDI (SMPTE 259M) or DVB-ASI (EN50083) signal to 4 or 8 signals. In each 1RU unit, either 4 groups of 1 to 4 splitter or 2 groups of 1 to 8 splitter can be implemented.

The Teleste Luminato 4X4 video headend platform has been designed to cope with existing challenges as well as an uncertain future.

The Appear TV X10/X20 platform is a dedicated solution for high speed video networking, enhanced IP security, video distribution and contribution.

PBI DCH-4000P is a line of universal high-end digital receivers. Depending on model, receivers of this series can be equipped with various combinations of inputs (ASI, IP, QPSK, QAM, COFDM, DS3) and outputs (CVBS, SDI, ASI, DS3, and IP). Models equipped with relevant IP output can be used for video streaming over TCP/IP networks. In this series, remote control and monitoring of devices are realized via SNMP or HDMS software.

Luminato platform is designed in a compact form factor (1U) and is noted for low power consumption. Up to six modules can be mounted in one rack. All modules are "hot" swapped, which enables the maintenance without loss in quality of rendered services. Modular architecture enables the receipt of signals from different sources (ASI, DVB-S/S2, DVB-T) and issue of digital stream to output interfaces IP, ASI, QAM. .

DMM-1000 is a head-end digital cable TV station. 19" chassis comprise 8 modules – including the high-end IRD module (DMM-1300P), QAM/COFDM modulator (DMM-1300TM), MPEG2 encoder (DMM-1300EC), and re-multiplexer (DMM-1300MX), which ensure reception, decoding, decryption, re-multiplexing, and modulation of DVB signal. Flexibility and usability of DMM-1000 ensure high integration and stability of the entire system.

DCH-2000AV is an 1+1 analog baseband audio/video redundancy switch.

PBI DCH-3100P —is professional digital receiver decoder for satellite, cable and terrestrial TV networks . Depending on the model, the receivers can be equipped with various input combinations (ASI, QPSK, 8PSK, QAM, COFDM), as well as the ASI output.

Appear TV StreamCore SC2000 (4U, 16 sockets) and SC2100 (1U, 9 sockets) stations are built on the basis of flexible modular platform, which offers the ample opportunities of adapting the station to specific customer’s requirements. The platform enables reception, descrambling, and scrambling of signal, as well as reception and transmission of streams via TCP/IP protocol. SC2000/2100 can be equipped with various input interfaces, such as ASI, QPSK, DVB-S2, and IP. Incoming streams can be descrambled with use of DVB CAM modules or virtual smart cards AES. Also, the station enables analysis and change of content in PSI/SI tables – according to operator’s requirements. Scrambling of streams under AES standard and with use of coding systems (for DVB, prior to issue on ASI or IP output interfaces) is supported.

Appear TV StreamCore SC2000 (4U, 16 sockets) and SC2100 (1U, 9 sockets) stations are built on the basis of flexible modular platform, which offers the ample opportunities of adapting the station to specific customer’s requirements. The platform enables reception, descrambling, and scrambling of signal, as well as reception and transmission of streams via TCP/IP protocol. SC2000/2100 can be equipped with various input interfaces, such as ASI, QPSK, DVB-S2, and IP. Incoming streams can be descrambled with use of DVB CAM modules or virtual smart cards AES. Also, the station enables analysis and change of content in PSI/SI tables – according to operator’s requirements. Scrambling of streams under AES standard and with use of coding systems (for DVB, prior to issue on ASI or IP output interfaces) is supported.

PBI DCH-3000P – high-end digital CI receiver (2 ASI TS inputs/outputs, optional QAM or COFDM input) – supports Common Interface. User can install up to 2 PCMCIA CI modules – to receive various coding in DVB-S/-C/-T or DVB-ASI networks (including Conax, CryptoWorks, Irdeto, NDS, Mediaguard, SECA, Nagravision, Viaccess). It supports two signal inputs – one with QPSK/QAM/COFDM (signal received from DVB-S/-C/-T) and another on ASI (signal may come from another head-end digital CATV equipment – e.g., from similar decoder).

ARRIS D5 Universal Edge-QAM (UEQ) is a solution for processing of SPTS and MPTS MPEG-streams received from IP-network, establishment of multiplex channels, and their transmission as QAM-modulated signal in HFC network. This platform allows simultaneous injection of up to 3000 MPEG streams – via four GigabitEthernet interfaces located on network access module

Service-injector is designed to support the work of EPG system and to submit the individual data to multiplexers. I201 is equipped with ASI input – to retrieve from transport stream and edit the information on EPG, and to analyze the PSI/SI tables

New Vision Mosaic system allows the display of programs in the form of mosaic (directly at subscriber terminals). Using the remote, subscribers can choose the audio from any video channel. Multi-screen "Mosaic" guide looks the most attractive in comparison with formatted program output mode (as a text list); therefore, it enables more efficient management of programs (along with SI-EPG).

CTI DC-503 – high-end digital CI receiver (2 ASI TS inputs/outputs, optional QAM or COFDM input) – supports Common Interface. User can install up to 2 PCMCIA CI modules – to receive various coding in DVB-S/-C/-T or DVB-ASI networks (including Conax, CryptoWorks, Irdeto, NDS, Mediaguard, SECA, Nagravision, Viaccess). It supports two signal inputs – one with QPSK/QAM/COFDM (signal received from DVB-S/-C/-T) and another on ASI (signal may come from another head-end digital CATV equipment – e.g., from similar decoder).

DC-603/605 is a flagship series of high-end digital CTI receivers. Depending on model, receivers of this series can be equipped with various combinations of inputs (ASI, QPSK, QAM, COFDM, DS3) and outputs (CVBS, SDI, ASI, DS3, IP). Models equipped by relevant IP output can be used for video streaming over TCP/IP networks. In this series, remote control and monitoring of devices are realized via SNMP or HDMS software.

E201P is a high-end MPEG-2 DVB encoder designed to convert the analog (video, audio) signals to digital ones. The unit performs encoding and compression of video/audio in digital streams (according to MPEG-2 standard) – with further multiplexing to single SPTS. E201P is compact and occupies only 1U (in 19” rack).

M208 multiplexer is designed to process the MPEG-2 traffic streams (TS) – multiplexing, filtering, and much more. The multiplexer is really flexible, reliable, with user-friendly interface.

M108CS multiplexer is designed to process the MPEG-2 traffic streams (TS) – multiplexing, filtering, and much more. The multiplexer is really flexible, reliable, with user-friendly interface.

M108C multiplexer is designed to process the MPEG-2 traffic streams (TS) – multiplexing, filtering, and much more. The multiplexer is really flexible, reliable, with user-friendly interface.

S100 scrambler is designed to encrypt the digital TV signal. S100 supports simulSrypt standard, has a built-in check word generator, and can work both with fixed and variable value of check word. Scrambling can be realized for both TV programs and individual elementary streams.

Q101 is a DVB-C QAM modulator (reconfigured in full range of TV frequencies)