Measured signals |
Analog TV / FM radio / C / T / H / T2 / S / S2 |
TV and color standards |
PAL, SECAM, NTSC B/G, I, D/K, L/L', M/N |
Analog TV measurement |
C / N ratio, signal level, hum modulation level |
Supported types of digital signals modulation |
DVB-C: 16/32/64/128/256 QAM DVB-T/H: QPSK, 16/64 QAM DVB-T2: QPSK, 16/64/256 QAM DVB-S/S2: QPSK, 8 PSK |
Measuring range of digital signals level (level measurement error ± 1,5 dB at C / N ratio > 20 dB, resolution at level of 0.1 dB) |
DVB-C: 30 – 110 dBmkV DVB-T/T2/H: 25 – 110 dBmkV DVB-S/S2: 40 – 110 dBmkV |
MER measurement (measurement accuracy of ± 2,0 dB) |
DVB-C: 40 dB DVB-T/T2/H: > 30 dB DVB-S/S2: > 28 dB |
Measurement of bit error rate |
DVB-C: BER DVB-T/T2/H, DVB-S: CBER, VBER DVB-S2: CBER, LBER |
Constellation diagram is available for |
DVB-C, DVB-T/T2/H, DVB-S, DVB-S2 |
Echo signal |
DVB-T/T2/H |
Spectrum analyzer |
Input frequency range |
5 ... 1050 MHz (TV) 950 ... 2150 МHz (SAT) |
Frequency range of spectrum analyzer (adjustable) |
0 МHz – 1045 МHz (TV), Full /600/300/200/100/50/20/10 МHz (SAT) |
Frequency step |
10 kHz(TV), 1 МHz (SAT) |
Bandwidth resolution |
30 kHz, 100 kHz, 300 kHz, 1 МHz, 3 МHz (TV) 1 МHz, 3 МHz (SAT) |
Input levels range |
10 – 120 dBmkV (TV) 30 – 120 dBmkV (SAT) |
Accuracy of measurement |
<1,5 dB |
Measurement detector |
Peak, sample,AVG(TV) |
TS analysis |
DVB-ASI interface |
75 Ом, BNC |
DVB-ASI clock |
270 МHz |
Max. data rateDVB-ASI |
0 – 72 Мb/s |
DVB-ASI output signal level |
1,0 Vp-p, nominal |
DVB-ASI return response/loss |
>15 dB |
DVB-ASI Input signal level |
800 мV ±10% |
Real time signal decoder |
Displaying of TV pictures in real time (via CA system). Including program numbers, program names, provider information, video&audio PID codes |
TR101290 monitor |
TR101290 three levels real time monitor |
Basic information |
PID percent calculation in accordance with the stream type . Video and audio, PSI / SI, null packeges |
PID codes list |
Displaying of all PID codes in the current transport stream |
Program information |
Detailed information about the program, if it is not encoded. Video resolution and audio compression rate |
PRC monitor |
Calculation of PRC interval and PRC accuracy |
PSI/SI list |
Displays PSI / SI information as a tree. Including PAT, PMT, CAT (NIT, SDT, RST, TDT, EIT options) |
Program information |
EPG |
PID codes capture |
Capture of specified PID code by its type: video, audio, PSI (PAT, PMT, NIT, TDT, RST, SDT, EIT), etc. Data display in hexadecimal format |
TS recording and replay |
8 GB hard disk to record transport stream |
General features |
Display |
7 inch TFT LCD, 800 x 480 pixels |
AC/DC adaptor |
AC 100 - 240 V / 50-60 Hz, DC 12V / 5A |
Battery |
Lithium-ion (Li-ion), 7,4 V / 13 Ah |
Battery charge time |
About 5 hours |
Continuous working time |
> 4 hours |
Remote power supply |
5/13/15/18/21 V, Max. 5 W |
Control signals |
22 kHz, DiSEqC 1.2 protocol and SaTRC |
Dimensions (WxHxL), mm |
245 х 194 х 105 |
Weight, kg |
2,8 |
Working temperature, °С |
From -10 up to +50 |
Storage temperature, °С |
͂ From -20 up to +70 |