Physical characteristics
|
Operating temperature range, ° C |
from 0 to 40 |
Relative humidity from, % |
5 to 95 (with no condensation) |
Storage Temperature, ° C |
-40 to 70 |
Dimensions (H x W x D) cm |
16.3×5.3×14.5 |
Weight, kg |
0,37 |
Diagnostic LEDs |
Power, DS, US, Online, Link |
Interfaces
|
RF Interface |
to external F-connector |
Ethernet interface (bridge) |
10/100/1000 Base-T Ethernet RJ-45 |
Input voltage |
~115-240 V, 50/60 Hz |
Power switch |
only in the model S |
Energy consumption |
5.5 W (max.) |
RF circuit
|
Downstream channel |
The frequency range, MHz |
from 108 to 1002 |
Channel- bonding |
up to 8 |
The number of tuners |
2 |
Capture bandwidth, MHz |
96 for the tuner (total- 192) |
Modulation (QAM) |
64 or 256 |
Data transfer rate, Mbit / s (theoretically) |
up to 334 (A, C models) |
up to 444 (B, S models) |
Level of the RF circuit input sensitivity , dBmV |
-15 to +15 (A, C models) |
-17 to +17 (B, S models) |
Bandwidth MHz |
6 (A, C models) |
8 (B, S models) |
MoCA filter |
Yes |
Upstream channel |
Frequency range, MHz |
from 5 to 42 (A model) |
from 5 to 65 (B, S, C models) |
Channel -bonding |
up to 4 |
Modulation |
QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAMi 128 QAM ( only S-CDMA) |
Bandwidth modulation kHz |
TDMA: 200, 400, 800, 1600, 3200, 6400 |
S-CDMA: 1600, 3200, 6400 |
Data transfer rate, Mbit / s ( theoretically) |
up to 122 |
Output level of RF circuit , dBmV ( per channel ) |
A-TDMA:
+17 .. 57 dBmV (32 QAM, 64 QAM); +17 .. 58 dBmV (8 QAM, 16QAM); +17 .. 61 dBmV (QPSK)
(under transmission over two channels the output power decreases by 3 dB (under transmission over three or four channels the output power decreases by 6 dB)
|
S-CDMA: +17 To +56 dBmV (all modulations) (under transmission over two or more channels, the output power is reduced by 3 dB) |
Automatic level control |
YES |
Frequency stability, kHz |
±5 |
Output impedance, ohms |
75 |
Standards
|
DOCSIS 3.0 |
PSE |
EuroDOCSIS 3.0 |
VCCI |
UL® 60950 |
RoHS |
FCC Part 15 Class B |
WEEE |
CE, CB |
IEEE 802.3, IEEE 802.3ab |