+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us

Catalog

SFP WDM/CWDM, XFP modules

Сортировка: orderby

Copper SFP and GBIC modules

Производитель: FoxGate
Modules: SFP
Module SFP-copper and GBIC-copper of 1000Base-T standard provide data transmission along twisted pair of 5 categories at distance up to 100 meters.

Dual-fiber SFP modules (Mini GBIC)

Производитель: FoxGate
Modules: SFP
Technology: two-fiber
SFP 2xx-xx-xx LC – are transmit-receive modules intended for arrangement of duplex connections along with high-speed (up to 1.25 Gb/s) technologies of data transmission. There are models supporting function of digital diagnostics of parameters (DDM).

WDM SFP modules (Mini GBIC)

Производитель: FoxGate
Modules: SFP
Technology: WDM (single fiber)
To arrange connection as per WDM technology is used pair of optical modules installed at different ends of communication line. For example, module FoxGate SFP-1SM-1310nm-xxSC – uses wave length 1550 nm for data reception and 1310 nm for data transmission i.e. 1310TX/1550RX and module FoxGate SFP-1SM-1550nm-xxSC – uses wave length 1310 nm for data reception and 1550 nm for data transmission, i.e. 1550TX/1310RX.

SFP-03-1310WDM/SFP-03-1550WDM

Производитель: Step4Net
Modules: SFP
Technology: WDM (single fiber)
To arrange connection as per WDM technology ,a pair of optical modules installed at different ends of communication line is used. For example, module SFP-1SM-1310nm-xxSC – uses wave length 1550 nm for data reception and 1310 nm for data transmission i.e. 1310TX/1550RX and module SFP-1SM-1550nm-xxSC – uses wave length 1310 nm for data reception and 1550 nm for data transmission, i.e. 1550TX/1310RX.

Transceivers SFF 2x10, SFF 2x5

Производитель: FoxGate
Modules: SFF
Technology: WDM (single fiber)
Soldered optical modules in performance of 2x10, 2x5 PIN are intended for transmission and receiving of signal via one or two single-mode optical fibers

FoxGate QSFP+ 10LC

Производитель: FoxGate
Modules: QSFP+
Technology: two-fiber
FoxGate SFP + 10LC - it's 40 Gigabit SFP module that has a dual LC connector and is used to connect Ethernet devices by single mode optical fiber (SMF) at a distance up to 10 km.

GBIC modules

Производитель: FoxGate
Modules: GBIC
Technology: WDM (single fiber)
Transceivers are equipped with 1 optical port with SC connector and provide “hot swapping" and installation

FoxGate CFP 10LC

Производитель: FoxGate
Modules: CFP
Technology: WDM (single fiber)
FoxGate CFP 10LC - is 40 Gigabit CFP module with dual LC connector which is designed for Ethernet devices connection by single mode optical fiber (SMF) at a distance up to 10km. Optical budget 7,5dB. Module supports DDM function.

Single-fiber 10G SFP+ modules FoxGate

Производитель: FoxGate
Modules: SFP+
Technology: WDM (single fiber)
Transceivers FoxGate SFP+ support work with single-mode optical cable and provide data transmission at a rate 10 Gbps. The transceivers are equipped with 1 optical port with LC connector.

SFP GEPON transceiver FoxGate

Производитель: FoxGate
Modules: SFP PON (GEPON)
Technology: WDM (single fiber)
FoxGate 1,25 Gbps, 1490 nm Tx/1310 nm Rx, SC, SFP, 20 km - SFP GEPON transceiver is used in optical line terminal. Transceiver provides two-way data transmission with a symmetrical velocity of 1.25 Gbit / s over a single optical fiber in a passive optical network (PON) at a distance up to 20 km.

Single-fiber 10G XFP modules FoxGate

Производитель: FoxGate
Modules: XFP
Technology: WDM (single fiber)
Transceivers FoxGate XFP support work with single-mode optical cable and provide data transmission at a rate 10 Gbps. The transceivers are equipped with 1 optical port with LC connector.

40-Gigabit copper cable FoxGate QSFP+/QSFP+ DAC-Xcu

Производитель: FoxGate
Modules: Cables of Direct Connection
QSFP+/QSFP+ DAC-Xcu — is 40-gigabit copper cable of direct connection X meters ( Х = 0,5; 1; 2; 3; 4; 5; 7).

Dual-fiber SFP+ modules FoxGate

Производитель: FoxGate
Modules: SFP+
Technology: two-fiber
SFP+d FoxGate are transceiver modules for organization of full-duplex connections in conjunction with high-speed (to 10.3 Gb/s) data transfer technologies. Modules support digital diagnostics function (DDM).

CWDM XFP 10Gbps modules

Производитель: FoxGate
Modules: XFP
Technology: CWDM

Interface Converter X2 in SFP +

Производитель: FoxGate
Modules: Interface Converters

Interface converter X2 in SFP + FoxGate designed for an installation of optical transceiver with form factor SFP + (10Gb / s) into the equipment with interface X2 (10Gb / s).

FoxGate QSFP+ 850nm-0,1MPO

Производитель: FoxGate
Modules: QSFP+
Technology: WDM (single fiber)
FoxGate QSFP + 850nm-0,1MPO — is 40-Gigabit 850nm QSFP + module with 12/8 MPO connector. It is designed for connecting of Ethernet devices by Multimode Fiber (MMF) at distances up to 100 meters for OM3 MMF (150m for OM4 MMF). Module supports digital diagnostic functions (DDM).

CWDM SFP+ 10Gbps modules

Производитель: FoxGate
Modules: SFP+
Technology: CWDM
CWDM SFP+ 2SM-xxxxnm-10LC – transmit-receive modules of SFP+ form factor. They are intended for arrangement of high-speed duplex connections. They are developed for technology of Coarse Wavelength Division Multiplexing (CWDM) and operating with rates of 9.95/10.3 Gb/s. They are produced for CWDM lengths of waves (1270-1330 nm, 1470-1610 nm) and maintain digital diagnostic function (DDM).

FoxGate CFP 40LC

Производитель: FoxGate
Modules: CFP
Technology: WDM (single fiber)
FoxGate CFP 40LC - is 40 Gigabit CFP module with dual LC connector. Is used to connect Ethernet devices by single mode optical cable (SMF) at a distance up to 40km. Optical budget is 18dB. Module supports DDM function.

SFP 100Mbps WDM single mode modules FoxGate

Производитель: FoxGate
Modules: SFP
Technology: WDM (single fiber)
Optical modules FoxGate SFP 0.1-1SM-1310nm-xxSC and FoxGate SFP 0.1-1SM-1550nm-xxSC are used for connection by WDM (Wavelength Division Multiplexing) technology.

40-Gigabit copper cable FoxGate QSFP+/4SFP+ DAC-Xcu

Производитель: FoxGate
Modules: Cables of Direct Connection
FoxGate QSFP+/4SFP+ DAC-Xcu — is 40-gigabit copper cable of direct connection QSFP+(40G) with 4 SFP+(10G) X meters ( Х = 0,5; 1; 2; 3).

XFP 10Gbps modules

Производитель: FoxGate
Modules: XFP
Technology: two-fiber
XFP 10Gbps modules maintain unique technology of digital diagnostics that in real time allows tracking parameters of device operation, like: operating temperature, laser current deviation, radiated optical power, received optical power, as well as alarm system of the overrun parameters.

DWDM MultiRate XFP Modules

Производитель: FoxGate
Modules: XFP
Technology: DWDM
FoxGate XFPd-DWDM-2SM-XX-YYLC– are single-mode transceivers to provide data transmission to duplex-optic communication lies at rate from 9.95 Gbps to 11.1Gbps. Transceivers maintain function of «hot swapping» and DDM.DWDM XFP of these series operates at wave lengths from 1528.77 nm to 1563.86 nm with pitch 100 GHz in accordance with ITU-T. They are widely used in the net DWDM equipment and in LAN, as well as in the network core.

CWDM SFP modules (Mini GBIC)

Производитель: FoxGate
Modules: SFP
Technology: CWDM
CWDM SFPd-2SM-xxxxnm-xxLC – are transceiver modules intended to arrange high-speed duplex connections. They are intended for Coarse Wavelength Division Multiplexing technology (CWDM) and operate with rates 1.25/1.0625Gbps. Modules are produced for eighteen CWDM lengths of waves (1270 nm, 1290nm, 1310nm.... 1610nm) and maintain digital diagnostics function (DDM).

Transceivers 1х9

Производитель: FoxGate
Modules: Modules 1 х 9
Technology: WDM (single fiber)
Optical transceivers in 9-x output plastic cases with individual input/output for connectors of SC type (FC, ST) for signal transmission via two optical fibers. They are intended for application in fiber-optic systems of data transmission, optical multiplexors, SDH-equipment of STM-1 / STM-4 level, optic modems and converters Fast Ethernet and Gigabit Ethernet.


The use of WDM SFP (mini-GBIC) modules in switches with SFP slot allows the user to create an optical gigabit channel without using additional active devices — media converters. This makes it possible to reduce the number of active devices in the network and, consequently, to reduce the delay of data transmission between switches. The reduction of active devices in the network and reducing delays at them positively affects the transmission speed and the reliability of the network as a whole.