+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us

Optical equipment for cable TV

Сортировка: orderby
Вид

Optical receiver Arcotel GA8010

Manufacturer: Arcotel
Type: Receiver FTTH (subscriber)
Options receiver/node: AGC
Use of modern high-quality components has allowed to make a mini-receiver which is not only functional and affordable, as well as reliable and economical.

TELESTE AC800 Optical node

Manufacturer: Teleste
Type: Optical node
Options receiver/node: AGC, Ability to install the module OK
AC800 is an optical receiver with one active output amplifier, with the possibility to extend the functionality through modular design. New features can be added by you later with the help of appropriate software or insert modules. The function of ALSS, which is controlled by the EMT module is possible (EMT - Element Manager Transponder is designed to interact with the management and monitoring systems), or a cheaper detector module with fixed frequencies of the pilot signals. The transponder can be easily mounted in the slot for the insert modules without external cables. This module performs the measurement and control of a number of parameters of the node. It can be controlled either locally from the lep-top or a manual programmer, or remotely using EMS management function (EMS software is a means of Teleste product monitoring and control, allowing cable network operators to constantly monitor the network status). Amplification stage is created on the modern GaAs element basis, which ensures high quality signal. Amplification can be adjusted in two interstage positions allowing to work a in wide dynamic range. Due to the use of internal divider operation, the work on two outputs is possible. Backward signal channel can be fed directly to the transmitter through an optional external input port.

Optical transmitter ARCOTEL WT86xxC

Manufacturer: Arcotel
Type: Transmitter 1310
Optical transmitter is intended to transfer cable television signals through optical fiber. It is equipped with a high-stable cooled DFB laser made in USA. Structurally it is made in a form of unit in height 1U under installation into the 19" rack and has buit-in supply unit.

Optical amplifier ARCOTEL WE1550

Manufacturer: Arcotel
Type: Amplifier EDFA, YEDFA
WE1550-хх - optical amplifier on the erbium-doped fiber (EDFA - Erbium-Doped Fiber Amplifier). The optical amplifier consist of erbium-doped optical fiber and high-reliable pumping lasers working on 980/1480 nm. Good operational indicators and acceptable cost allow to use this model in the cable television networks of large and medium sizes

Rack-mountable optical receivers of the reverse channel ARCOTEL of WR2002R-2004R series

Manufacturer: Arcotel
Type: Reverse channel receiver
Receiver contains from one to four independent optical receivers in the one housing. The alternate attenuator is installed on each channel. Input circuits are made on qualities PIN diodes. Structurally it is made in a form of unit in height 1U under installation into the 19" rack and has built-in supply unit.

Optical receiver TERRA OD003

Manufacturer: TERRA
Type: Receiver FTTH (subscriber)
Options receiver/node: AGC, Electronic adjustment
«budget» compact optical receiver with expanded range 1002 MHz; electronic setting of all parameters; AGC linked to the optical input level; digital indication of optical input level and of other parameters

Optical FTTH receiver ARCOTEL GA8030(OR)

Manufacturer: Arcotel
Type: Receiver FTTB/FTTC
Options receiver/node: Without AGC
Optical receiver GA8030(OR) is intended for work in FTTH (fiber in house) networks. The receiver performs converting of the optical amplitude-modulated signal into the radio-frequency (RF) wideband signal of TV range and following signal amplification for its distribution through the coaxial network.

Optical transmitter ARCOTEL WТ1550 with external modulation

Manufacturer: Arcotel
Type: Transmitter 1550
The reliable, low-noise optical transmitter with the range 1550 nm with the external modulation of optical power. It is made with applying of latest DFB lasers (Distributed Feedback Laser - laser with distributed feedback on the injection laser diode with reflection Bragg grating) providing good nonlinear indicators. Automatic control of amplification at the RF input provides the additional stability in work

ARCOTEL WE1550 high power multi-output optical amplifier

Manufacturer: Arcotel
Type: Amplifier EDFA, YEDFA
In the range of ARCOTEL optical amplifiers appeared power amplifiers with multi- outputs and high output level of signal. Such amplifiers functioning is based on optical signal amplification technology using so called Er-Yb fiber with a double shell.

Optical switch ARCOTEL OS21

Manufacturer: Arcotel
Type: Optical switch
The optical switch OS21 is intended for operation in the optical networks of different purpose and allows to commutate an optical signal both in manual and in automatic mode. It can automatically connect a reserve line at signal failure in the main one. The built-in system of remote monitoring and control through Ethernet network through SNMP protocol, allows to install a switch in any point of a network and fully control its status

Optical receiver ARCOTEL GA8045(OR)- 220V

Manufacturer: Arcotel
Type: Receiver FTTB/FTTC
Options receiver/node: AGC, Electronic adjustment, Management and monitoring via SNMP
Optical receiver ARCOTEL GA8045 (OR) is designed to work in the optical parts of cable TV networks. Basically it is modern FTTB, FTTC (fiber to the building and fiber to the curb) network.

ARCOTEL GA9036(OR)- 220V, GA9036(OR)E- 220V optical receiver

Manufacturer: Arcotel
Type: Receiver FTTB/FTTC
Options receiver/node: AGC
Arcotel GA9036 (OR) — 220V, GA9036 (OR) E-220V is an optical receiver for use in optical sections of cable TV networks. Basically it means networks with deep fiber — optics penetration (FTTH, FTTB).

Optical receiver TERRA OD100

Manufacturer: TERRA
Type: Receiver FTTB/FTTC
Options receiver/node: AGC, Electronic adjustment
Electronic setting of all parameters; AGC linked to the optical input level; thermocompensation of deflection of HF output level; digital indication of optical input level and of other parameters; high output level of a signal; solid cast housing.

Optical receivers TERRA OD001A, TERRA OD002

Manufacturer: TERRA
Type: Receiver FTTH (subscriber), Receiver FTTB/FTTC
Options receiver/node: AGC, Electronic adjustment
Electronic setting of all parameters; AGC linked to the optical input level; thermocompensation of deflection of HF output level; digital indication of optical input level and other parameters; possibility of remote power supply through output HF output

Optical receivers TERRA OD001A, TERRA OD002

Manufacturer: TERRA
Type: Receiver FTTH (subscriber), Receiver FTTB/FTTC
Options receiver/node: AGC, Electronic adjustment
Electronic setting of all parameters; AGC linked to the optical input level; thermocompensation of deflection of HF output level; digital indication of optical input level and other parameters; possibility of remote power supply through output HF output

TERRA OD110 optical receiver

Manufacturer: TERRA
Type: Optical node
Options receiver/node: AGC, Electronic adjustment
This optical receiver TERRA OD110 AGC has tied to the optical input level switchable filter ingress noise, integrated data transmitter for remote monitoring subsystem "MasterWatch", die-cast housing and more.

CWDM reverse channel modules for ARCOTEL optical receivers

Manufacturer: Arcotel
Type: Plug-ins
Modules are equiped by high-stability DFB laser with optical isilator. 8 working wave length are in access,which permits to transmit up to 8 reverse channels in one optical fiber.

TELESTE optical equipment of HDO series

Manufacturer: Teleste
Type: Optical Platform (Modular)
Optical forward channel (HDO 902 HDO or 701) transmitter has decoupled narrowband and broadband input. The transmitter input values are normed, therefore, at the same input signal, the same optical modulation index will be achieved with the same settings of input attenuators and equalizers on all transmitters.

TELESTE AC 1000 Amplifying platform

Manufacturer: Teleste
Type: Optical node
Options receiver/node: Without AGC, Ability to install the module OK
This amplifying platform is a super-power amplifier with a gain of 39 dB and a possibility of its modification to a full optical receiver. The amplifiercan be used both for thetrunk and for distribution network; at the same time, afterthe splitterinstallation there will be three outputs.

TELESTE AC 500 Amplifying platform

Manufacturer: Teleste
Type: Optical node
Options receiver/node: Without AGC, Ability to install the module OK
The AC500 optical Amplifying platform is the youngest basic model in the "ACCESS" family. The AS500 platform has one active output stage and the possibility of splitting the output signal in two directions through the integrated splitter or coupler. In the minimum configuration AC500 is a powerful trunk amplifier, which can later be upgraded to an optical node. Upgrading is carried out by inserting the optical modules of the forward channel receiver and backward channel transmitter. Upgrading is performed quickly and easily.

TELESTE CXE800 optical receiver

Manufacturer: Teleste
Type: Receiver FTTB/FTTC
Options receiver/node: AGC
New optical receiver CXE800 meets the market needs in the simple budget solution for FTTB networks. It is designed for networks where ease of installation and cost-effectiveness are the determining factors.

TELESTE AC8000 scalable optical node

Manufacturer: Teleste
Type: Optical node
Options receiver/node: AGC, Ability to install the module OK
This optical node is a unique in its kind optical platform that provides the complete service and multilateral multi-pronged approach to the solution of any problem posed by the HFC network operator. There are a number of features that make ACcess 8000 the best solution for any fibre-coaxial networks. The modular design of this platform gives the opportunity to gradually extendthe node configuration in the process of the network extension.The design of the modules and the calibration system ensures easy maintenance and operation.

TELESTE CXE880 optical receiver

Manufacturer: Teleste
Type: Optical node
Options receiver/node: AGC
The CXE880 node for deep penetration of optics. It is designed for the cases where quality performance and economic efficiency. is required. Provided all requirements of the modern coaxial networks are provided: forward channel up to 1000 MHz and backward channel up to 85/100 MHz. Optical connectors are located outside, which makes it easy to install

Optical transmitter TERRA MOS211

Manufacturer: TERRA
Type: Transmitter 1310
cooled DFB laser; laser thermostabilization system; measuring of level of input HF signal; possibility of manual or automatic adjustment of HF level; AGC system providing the fixed output power of a laser; Wide spectra of choice of output optical power; procreator of nonlinear distortions; all parameters are controlled programmatically through CMH data bus; integrated display and keyboard for control.