- More products
FoxGate S6224-S4 is a managed switch with 24-port 10/100 Mbps Ethernet, four-port Gigabit Ethernet, with combined slots for SFP-optical transceivers.
Switch FoxGate S6224-S4 has a unique networking opportunities, including: MAC address filtering, support IEEE802.1Q VLAN, QoS, ACL, IEEE802.1x, IEEE802.1d / w, Port Mirroring, SSH, which makes this switch the best means for constructing Ethernet-networks in business complexes, corporate and municipal Ethernet-networks.
Benefits
High performance switch fabric and traffic shaping with 4 priority queues for non-blocking forwarding at full speed interface, and provide quality assurance for multimedia services.
Update possibility of the software using FTP / TFTP.
4 Copper Gigabit Ethernet ports, combined with slots for SFP-optical transceivers. Supported protocols: STP, RSTP (802.1w) and 802.3ad for efficient and reliable operation in today's distributed Ethernet-networks. Support protocols STP, RSTP (802.1w) and 802.3ad for efficient and reliable operation in today's distributed Ethernet-networks.
Support SSH makes the most reliable way to remotely configure the switch.
Flexible management and diagnostics. Support for SNMP v2c, Web, Telnet, local management console, port mirroring, ability to save and modify text configurations, the use of commands, similar to that used in Cisco IOS, can significantly reduce the time and other resources to maintain and develop the corporate or the operator's data network transmission.
Switch FoxGate S6224-S4 has advanced features for working with IP multicast, such as: IGMP Snooping, L2 Querier, support multicast VLAN and SCM (security control multicast), which ultimately makes this switch ideal tool for working with IP Multicast streams.
Technical characteristics
|
Standard Compliance |
IEEE802.3 10BASE-T Ethernet IEEE802.3u 100BASE-TX/FX Fast Ethernet IEEE802.3x Flow control IEEE802.1x access control IEEE802.1D/w Spanning Tree IEEE802.1p Class of Service IEEE802.1Q VLAN IEEE802.3ad Link Aggregation TFTP/FTP DHCP BootP Telnet IP/UDP/TCP/ICMP HTTP SNMP V1/V2C
|
|
Interface |
24-port10/100BASE-T Ethernet RJ-45 |
|
Data Rate |
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)Gigabit Ethernet: 1000 Mbps (full duplex)
|
|
Determining cable type |
On all ports automatically detect the type of cable (MDI / MDIX)
|
|
Switching fabric |
12.8 Gbps |
|
Forwarding rate |
9,6 Mpps |
|
Port mirroring |
Yes |
|
Security |
Port securitySupport access list L2/L4Radius
|
|
Multicast
|
IGMP v1/v2/v3 snooping MLD v1/v2 snooping Multicast VLAN register for IPv4 and IPv6 Multicast receive control Illegal multicast source detect
|
|
Traffic Shaping |
4 queues for FE port and 8 port queues at GEQueuing algorithm: SPQ, WRRPrioritization based on DiffServ (DSCP)
|
|
Port trunking |
Aggregation 802.3ad LACP, 2 groups of ports Fast Ethernet and 1 group of Gigabit Ethernet ports
|
|
VLAN |
At the port level802.1q protocolPrivate VLANGroup registration GVRP
|
|
Management |
Console RS-232 interface (CLI)Telnet CLI (Command Line Interface)Web-based interfaceSNMP V2cStatic IP-address or DHCP clientSafety Management SSL / TLS, SSH v1/v2
|
|
Rate limiting
|
Rate limiting per port
|
|
MIB |
RFC1213 MIB II RFC1493 Bridge MIB RFC1643 Ether-Like MIB FoxGate Private MIB
|
|
Time synchronization
|
Time Protocol SNTP / NTP
|
Physical Specification
|
Dimensions |
440 × 171,2 × 43 |
|
Weight |
2,25 kg |
|
Input voltage |
100 – 240 V AC, 50/60 Hz |
|
Operating humidity |
5% ~ 95% |
|
Maximum power consumption |
30 W |
|
Operating temperature |
0 °C – 50 °C |
|
Storage temperature |
-40°C – 70 °C |
Ask the question: