+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us

Ethernet cable Step4Net UTP CAT 5e 4P 0,48 mm

Cable type:
Conductor material:
Number of cores:


4-pair UTP Cat5e Step4Net is used in local data networks transmission : PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN , Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s.

Compliance  with standards:

  • ISO/IEC 11801
  • ANSI/TIA/EIA-568-B.2
  • EN50173
  • YD/T1019

Operating conditions:

The cable is used for fixed installation in buildings, plants, structures and equipment. The feature of this type of cable is the use of copper wires with a bit of reduced diameter, thus decreasing the cost of the cable. The quality of signal transmission does not suffer , the only recommendation - do not use this cable at exorbitant distances of transmission . The quality of the copper used for manufacturing of twisted pair Step4Net is high and the  electrical conductivity of cable cores is strictly controlled during the  production process.


The cable consists of 4 pairs of wires twisted together. Conductors - copper wire 0.48 mm in diameter. Conductor Insulation - high density polyethylene. Outer sheath is made from PVC plastic . Sheath color is gray or other one on request.

Conductors color identification:

  • pair 1: white-blue/blue
    • pair 2: white-orange/orange
    • pair 3: white-green/green
    • pair 4: white-brown/brown


Cable is packed in  Reelex (Pull Box) boxes, for free pulling of cable end. Cable  length in box is 305 m (1000 ft).

Ask the question:
  1. Your name*
    Неверный ввод
  2. E-mail*
    Неверный ввод
  3. Phone
    Неверный ввод
  4. Your question*
    Неверный ввод
  5. Неверный ввод