Ethernet cable DCG UTP CAT 5E 4P 0,50mm CCA

Application:

4-pair UTP cable Cat 5е DCG is used in local data networks transmission: PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Мбит/с, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s.

Compliance with standards:

• ISO/IEC 11801
• ANSI/TIA/EIA-568-B.2
• EN50173
• YD/T1019

Operating conditions:

The cable is used for fixed installation in buildings, plants, structures and equipment. The copper-clad aluminum conductors are used here , which reduces significantly the cost of cable. Due to the standard sizes of conductors and quality control of copper plating during the production this cable can be used without restrictions.. When installing and operating the cable with CCA conductors should avoid excessive strain on the cable because CCA conductors are inferior in strength to full copper ones..

Design:

The cable consists of 4 pairs of wires twisted together. Conductors — CCA wire 24 AWG. Conductor Insulation — high density polyethylene. Outer sheath is made from PVC plastic . Sheath color is gray or other one on request

Conductors color identification:

• pair 1: white-blue/blue
• pair 2: white-orange/orange
• pair 3: white-green/green
• pair 4: white-brown/brown

Packing:

Cable is packed in Reelex (Pull Box) boxes, for free pulling of cable end. Cable length in box is 305 m (1000 ft).