Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

DEPS має статус
Офіційний дистриб'ютор
Raisecom
Виробник:
Доставка
Самовивіз
Доставка транспортними компаніями:
  • Нова пошта
  • DELIVERY
Гарантія
12 місяців офіційної гарантії від виробника

Модифікації:

Найменування Код Наявність Од. виміру Ціна дилерська Ціна роздрібна
1 Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1 171436 бух.

RC1201-4FE4E1T1 - шлюз TDMoverIP для корпоративного сектора і мобільних операторів, що забезпечує передачу TDM-трафіка через мережі з пакетною комутацією. Пристрій підтримує передачу потоків E1/T1 через мережі IP/Ethernet.

RC1201-4FE4E1T1 має 4 порти E1/T1, 4 порти Fast Ethernet з користувальницького боку і 1 порт Gigabit Ethernet з боку мережі. Пристрій перетворює дані потоків E1/T1 в пакети для передачі по мережам з пакетною комутацією, такими як MPLS і Ethernet. Пристрої RC1201 працюють в парі.

Схема застосування:

Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

Характеристики
Feature
Ethernet interface
  • 5 Ethernet ports, 4 for user side and one for network side
  • Transparent Ethernet bridging
  • User bandwidth profile by rate-limiting and VLAN filtering
  • VLAN tagging and stacking (Q-in-Q)
TDM interface
  • 4 E1 or T1 ports
  • E1 balanced and unbalanced or T1 options
  • G.703 unframed and G.704 framed modes
  • CAS and CRC generation for E1 circuit
TDM payload type CESoPSN, SAToP, HDLC and AAL1
TDMoverIP for Pseudowire Emulation
  • E1/T1 communication over Packet Switching Network
  • Support both framed and unframed E1/T1
  • Configurable buffer compensation for network packet jitter
  • Dedicated external clock injection port
  • QoS support by ToS and VLAN per 802.1p and 802.1Q
TDMoverIP timing
  • Adaptive: the clock is recovered from the Ethernet network side interface
  • Internal: the master clock source for the TDM circuit is provided by internal
  • crystal oscillator
  • External: an external clock injection is provided for synchronization
  • Loopback: the transmit clock is derived from the E1/T1 receiving clock
Ethernet switching functions
  • VLAN creation, deletion and configuration
  • 3 port modes: access, tunnel and trunk
  • Port isolation configuration
  • Link aggregation configuration
  • Port mirroring configuration
  • Per port bandwidth profile and rate limiting
  • MAC address table management
  • Up to 4 output queues
  • QoS policy based on CoS and DSCP
  • Ethernet port loopback detection
  • ACL configuration based on MAC
SFP module function
  • SFP module basic information (module type, media type, connector,
  • manufacturer information, speed, wavelength, etc)
  • SFP information retrieve (existing, speed, LOS and fault stats)
  • Digital Diagnostic (Tx power, received optical power, temperature, supply
  • voltage, Tx bias current, etc)
  • Alarm indication
Management options
  • Local management through console port
  • Remote management through SNMP and Telnet
Specification
E1 interface
  • 4 ports
  • Date rate: 2.048Mbps
  • Line code: HDB3
  • Framing: unframed or frame
  • with or without CRC-4
  • Signaling: CAS and
  • transparent CCS
  • Line impedance: 120/75 Oh
  • Jitter: per ITU-T G.823
  • Connector: RJ45 balanced
  • and BNC unbalanced
T1 interface
  • 4 ports
  • Bit Rate: 1.544Mbps
  • Line code: B8ZS/AMI
  • Comply with Bellcore GR-499-CORE, ANSI T1.403,
  • Jitter: per ITU-T G.824
  • Connector:
  • 100Ω balanced, RJ-45
Ethernet interface
  • 1 network port & 4 user ports
  • Data rate: 4 × 10/100Mbps
  • 1 × 1000Mbps
Bundles
  • Up to 64 bundles
  • Payload: CESoPSN, SAToP,
  • HDLC and AAL1
  • PSN: UDP/IP, MPLS, MEF
  • TDM Bytes: 1-1500
  • Jitter buffer size: 0-250ms
  • Destination bundle configure
  • Clock recovery: configurable
  • VLAN: untag, tag & double tag
  • Active VLAN: 4K
  • TPID: configurable
  • VLAN priority: 0-7
  • Dest IP address: configurable
Timing
  • Internal, external, loopback
  • and adaptive
Loopback
  • E1/T1 local and remote
  • loopback
Statistics
  • E1/T1 per G.826 & RFC2495
  • Ethernet per RFC2819
  • Receive buffer indication
  • SFP Digital Diagnostic
Dimension 440 (W) * 44 (H) * 210 (D) mm
Weight < 3KG
Power supply
  • AC: 176~264V, 50Hz
  • DC: -36~-72V
Power consumption ≤ 13W (at max load)
Working environment
  • Temp: -5~50 Celsius
  • RH: < 90% non-condensing
Safety compliance CE certification
Compliance
Standards & protocols
  • For TDM interface:
  • ITU-T G.703
  • ITU-T G.704
  • ITU-T G.706
  • ITU-T G.732
  • ITU-T G.823
  • For Ethernet port:
  • IEEE802.3x full duplex on
  • 10BaseT and 100BaseTX
  • IEEE802.3 10BaseT
  • IEEE802.3u 100BaseTX
  • IEEE802.1p
  • IEEE802.1Q
  • SNMPv1/v2c/v3
Ordering Information
RC1201-4FE4E1T1-AC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, AC power supplies
RC1201-4FE4E1T1-DC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, DC power supplies
RC1201-4FE4E1T1-O-AC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, AC power supplies, use the OCXO highly accurate crystal oscillator
RC1201-4FE4E1T1-O-DC 1U 19" standalone, 4 E1/T1 interfaces, 4 10/100BaseT interfaces,
1 1000BaseX (SFP) interface, DC power supplies, use the OCXO highly accurate crystal oscillator

Відгуки про Шлюз TDMoverIP Raisecom RC1201-4FE4E1T1

Для додавання відгуку необхідно авторизуватись

Або Зареєструватися

09 січня 2019

--

Рекомендуємо також

Ми приєдналися до бойкоту російської та білоруської продукції. Слава Україні!

We joined the boycott of russian and belarusian products. Glory to Ukraine!!

прапор України