+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us

Multifunctional measuring device MULTITEST MT2110/MT2115
Print

1
 

Measuring devices Multitest:

Multifunctional measuring devices Multitest are intended for adjustment and operation of the CATV systems of any complexity, individual TV antennas, community reception systems, etc. The devices are produced for operation in a standard 47-862 MHz or an extended range of frequencies 5∼870 MHz (under request) that allows to use them for adjustment of the cable systems with a return channel.

The devices allow measuring a TV signal level in a wide range of values of 30-120 dBmkV owing to automatic electronic attenuator. A function of measuring the signal levels for two channels simultaneously facilitates adjustment of AFC inclination. It is also possible to measure signal-to-noise ratio (S/N), audio/video ratio, alternating voltage in a cable. Re-tuning in the range is carried out both by means of the built-in grid, by numbers of programs and by frequency. It is possible to enter a channel number or frequency directly from the keyboard. There are models equipped with the built-in spectrum analyzers and possibility to connect the computer.

Small dimensions and weight, big operation period from accumulators, backlit display provides convenience of operation “in the field".

Brief technical characteristics of Multitest MT2110/MT2115:

It measures: signal level, signal-to-noise ratio, AFC inclination for two channels, video/audio ratio and backbone voltage. It is possible to enter a channel number or frequency directly from the keyboard. The devices have a spectral analyzer mode operating function. For this purpose, a 64х128 pixel backlit liquid crystal display was provided. The width of a scanned band can be entered by the user directly from the keyboard.  Also the memory of the devices was increased to perform measurements of up to 24 groups of 100 channels each. A function of measurement of the level difference between two channels is supplemented with a possibility of graphic view of any five channels which frequencies are located between the measuring frequencies.

  • Frequency range: 47 – 870MHz (MT2110); 5 870MHz (MT2115);
  • Frequency plan: OIRT D/K;
  • Range of input levels: 30dBmkV – 120dBmkV;
  • Accuracy: ±1.5dBmkV;
  • Input resistance: 75 Ohm;
  • Dimensions:214×94×47 mm;
  • Weight: 1.4 kg;
  • Operating temperatures range: -l5°С... + 40°С;

Operation period from accumulator: 6 hours.