+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us
Subscriber cable modems

Subscriber cable modem ARRIS TOUCHSTONE WBM760

0

Arris WBM760A compliant with DOCSIS 3.0;

Arris WBM760B compliant with EuroDOCSIS 3.0, DOCSIS 3.0;

Arris WBM760C compliant with Japanese DOCSIS 3.0;

Chanel Bonding (4 DS x 4 US)

IPv4 or IPv6 addressing modes for DOCSIS CM layer

10/100/1000 Base-T Ethernet interface

USB 2.0 interface

Attractive space-saving package with multiple mounting options

Simplified interoperability trough PacketACE configuration file editor

Two-way high speed IP services that enable higher bandwidth for interactive services

The Touchstone subscriber cable modem WBM760 is DOCSIS 3.0 / EuroDOCSIS 3.0 compliant device that enables advanced high speed multi-media and symmetrical services trough increased upstream and downstream bandwidths.

With DOCSIS 3.0 channel bonding, cable operators can offer data services at speeds greater than 160 Mbps to their subscribers to compete with VDSL and FTTH solutions. The WBM760 is backwards compatible with legacy DOCSIS 1.0, 1.1, and 2.0 cable equipment and can be deployed without service interruption.

Advantages:

  • Flexible NxM downstream/upstream channel bonding with superior throughput
  • 1 GHz downstream RF tuner with up to 100 MHz capture bandwidth
  • Multi-colored LEDs for rapid troubleshooting during installation or by phone with customer service
  • Downstream scanning override via web GUI for rapid installation
  • Meet or exceed industry radiated immunity and surge requirements
  • Easy to install and operate

Technical specifications:

Physical characteristics

Range of operating temperatures, °C

from 5 to 40

Relative humidity (without condensate),%

from 5 to 95

Storage temperature, °C

from -40 to 70

Dimensions (H х W х D), cm

18.0 x 4.3 x 15.0 (excluding F-connector)

Weight, kg

0,46

Diagnostic LEDs

Power, DS, US, Online, Link

Interfaces

RFinterface

External ’F’ type connector

Ethernet interface (bridged)

10/100/1000 Base-T Ethernet RJ-45

USB interface (bridged)

High Speed (480Mbps) USB 2.0

Input voltage

115-240 VAC, 50/60 Hz

Power consumption (W)

9 (max.)

Radio-frequency path

Downstream

Frequency range, MHz

from 108 to 1002

Bonded channels

up to 4

Capture bandwidth, MHz

96

Carrier bandwidth, MHz

8

Modulation (QAM)

64 or 256

Data rate, Mbps

up to 220

RF input sensitivity

from -17 to +17

Upstream

Frequency range, MHz

from 5 to 65

Bonded channels

up to 4

Modulation

QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM and 128 QAM (S-CDMA only)

Data rate, Mbps

up to 122

RF output level (dBmV – one channel)

A-TDMA:
+17 to 57 dBmV (32 QAM, 64 QAM);
+17 to 58 dBmV (8 QAM, 16QAM);
+17 to 61 dBmV (QPSK)
Note: A-TDMA max output power reduced 3dB when transmitting two channels and 6 dB when transmitting 3 or 4 channels
S-CDMA:
+17 to +56 dBmV (all modulations)
Note: S-CDMA max output reduced 3 dB when transmitting 2 or more chanels

Automatic level adjust

yes

Frequency stability, kHz

±5

Output impedance, Ohms

75

Standards

EuroDOCSIS 3.0 / DOCSIS 3.0

IEEE 802.3, IEEE 802.3ab

CE, CB

WHQL, USB-IF

RoHS, WEEE