+380 44 323 88 88
03040, Ukraine
18, Marychanska Str., Kyiv
Write to us
Ethernet cable

Ethernet cable Step4Net UTP CAT 5e 4P 0,50 mm CCA

2
Manufacturer:
Cable type:
UTP
Application:
Number of cores:
Description

Application:

4-pair UTP Cat5e Step4Net is used in local data networks: PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit / s, 100VG-AnyLAN , Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit / s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit / s.

Compliance  with standards:

  • ISO/IEC 11801
    • ANSI/TIA/EIA-568-B.2
    • EN50173
    • YD/T1019

Operating conditions:

The cable is used for fixed installation in buildings, plants, structures and equipment. The copper-clad aluminum conductors are used here, which reduces significantly the cost of cable. The quality of signal transmission is rather high  because in UTP cables Step4Net are used CCA conductors with a maximum content of copper. The thickness of the copper layer is strictly controlled during  the process of production  On the quality of the copper coating is also indirectly indicates a low ohm resistance of the conductors, which is much lower than most other cables with CCA conductors. When installing and operating the cable with CCA conductors should avoid excessive strain on the cable because CCA conductors are inferior in strength to full copper ones.

Design:

The cable consists of 4 pairs of wires twisted together. Conductors - CCA wire 24 AWG. Conductor Insulation - high density polyethylene. Outer sheath is made from PVC plastic . Sheath color is gray or other one on request.

Conductors color identification:

  • pair 1: white-blue/blue
    • pair 2: white-orange/orange
    • pair 3: white-green/green
    • pair 4: white-brown/brown

Packing:

Cable is packed in  Reelex (Pull Box) boxes, for free pulling of cable end. Cable  length in box is 305 m (1000 ft).